| Simple
kits & parts for modifying any electric guitar |
£
|
GUITAR MIDRANGE KIT - PART # GMGK
Our famous guitar midrange kit. A simple control that cuts out
the midrange from electric guitars, giving a smooth, acoustic-like
tone. The kit includes the parts to assemble on an existing Tone
pot. Very easy installation and great results. |
5.50 |
SUPER MIDRANGE KIT - PART # SMGK
An entirely new tone control for guitars. It not only cuts midrange
(from 0 to 5) but also boosts (from 5 to 10). Only 2 wires to
install. Complete with the control pot. Fully assembled.
|
16.20 |
SUPER MIDRANGE DELUXE KIT -
PART # SMDK
As above but with push pull pot for additional range
of tone controls. |
26.00 |
VOLUME KIT - PART # VGK
A simple and effective kit to retain the highs when the volume
control on the guitar is turned down. Works great on all guitars
all the time. |
1.40 |
VARI-VOL KIT - PART # VVK
Rotary switch replacement for your guitar volume pot
|
16.20 |
VARI-TONE KIT - PART # VTGK
A set of tone filters on a 6 position rotary switch similar to
that found on some Gibsons. A bypass option plus 5 tones including
out-of-phase and midrange cut / midrange boost.
|
unassembled
12.80
assembled
22.00
|
DELUXE VARI-TONE KIT - PART # DVGK
(FULLY WIRED)
A more advanced version of our Vari-Tone Kit (above). Includes
the 6 position tone filter, plus a separate push-pull pot that
changes the tonal range of the 5 filters giving 5 more sounds,
plus a blend, or mix control for the entire effect. The ultimate
in Tone tricks. Easy 2 wire installation. |
32.50 |
1 MEG POT - PART # 1MGK
A replacement for the Volume Control in electric guitars. It will
increase the gain of the pickups and make the guitar brighter.
Recommended for hot or high-performance pickups.
|
4.10 |
2 MEG POT - PART # 2MGK
A 2 Meg pot will increase the gain and brilliance of high gain
pickups even more than a 1 Meg pot. Recommended for high-gain
pickups only. Includes Volume Kit VGK. |
4.10 |
DUNLOP CRYBABY STANDARD MODIFICATION
-PART# DCSK
An easy mod to the Crybaby Wah pedal to get a warmer richer tone.
Minor soldering only. |
8.80 |
DUNLOP CRYBABY DELUXE FIVE-WAY MOD
- PART# DCD5GK
Adds a 6-position switch to the pedal to give a choice of 5 warmer
tones and a bypass of the modification for the original tone of
the pedal. Requires some assembly and the drilling of a 3/8"
hole in the side of the pedal. |
22.00 |
DUNLOP CRYBABY TRUE BY-PASS - PART#DCTB
Replacement DP-DT Footswitch to provide true bypass
|
16.20 |
| DUNLOP CRYBABY: POT REPLACEMENT - PART#DCHP |
28.00 |
BLUESKASTER WIRING HARNESS FOR STRAT-TYPE
GUITARS - PART# BLUGK
A great setup for 3 pickup Strat-type guitars. Includes a new
volume control with Volume Kit (VGK) installed, a Super-Midrange
(SMGK) tone control blender pot and a high quality new 5-position
switch, all pre-wired ready to go. |
58.00 |
BLUESKASTER WIRING HARNESS KIT PARTS ONLY
As above, but needs wiring up. |
41.00 |
| BLUESKASTER WIRING HARNESS DELUXE VERSION WITH PUSH-PULL TONE POT |
75.00 |
BLUESTONE WIRING HARNESS FOR TELECASTER-TYPE
GUITARS - PART# TELEK
An all-new wiring for Telecaster-type guitars. It uses a 5 position
switch to get a whole new range of tones including pickups in
series, parallel, and with the midrange boosted. Fully assembled.
Also available as modification for Kinman pickups at no extra
cost. |
65.00 |
BLUESTONE WIRING HARNESS KIT PARTS ONLY
As above, but needs wiring up. |
43.00 |
TONE BOX
Free-standing tone control combining both varitone and deluxe super midrange controls and true by-pass on footswitch! Works with any guitar - just plug in between guitar and amp |
55.00 |
A/B BOX
A simple but very useful footswitch, allows passive switching between a guitar input and two outputs. Can be used to A/B between two separate channels of an amp - in effect converting the amp to footswitchable dual channel or to create a true bi-pass to a stage tuner. Robust, gig-able construction. Uses no batteries. Does not affect the guitar's original tone or gain.
|
25.00 |
CUT BOOST FOOTSWITCH
Another simple but useful footswitch....ever wanted to boost a lead riff or solo on a single channel amp, without colouring the tone through effects pedals? The Torres 'Cut/Boost' pedal allows true bi-pass switching between normal guitar output and an output with a variable volume cut. Set up a rhythm level in the cut mode and switch to normal for a natural solo 'boost'. Can be used from amp to guitar or in amps effects loop. Incorporating the Torres 'Volume Kit'. Solid enough for any gig. Uses no batteries. |
30.00 |
Torres A/B and A+B foot switch, with click of a button move from one amp to another or play both together
|
 |
50.00 |